Paneltwistec AG, flange button head TX40

Standardized drive: TX40 for all screws

Paneltwistec AG TX40 flange button head screw made of blue galvanised and hardened carbon steel is a wood construction screw with a special screw tip and milling ribs above the thread. The special geometry of the screw tip reduces the torque needed to drive it in and minimises the risk of the timber splitting. The larger head diameter allows for considerably higher torque and head pull-through capacity. This makes for better use of the screw‘s tensile load-bearing strength.

Applications

Conditionally corrosion-resistant and suitable for use in service classes 1 and 2 according to DIN EN 1995 (Eurocode 5)
Timber Construction Screws Paneltwistec Ø 8.0 for fixing insulation above rafters
Not suitable for use with woods containing tanning agents

Material

Hardened carbon steel + blue galvanised
Free of chromium (VI) oxide
Good resistance to mechanical stresses

Note: You can find more TX40-drive screws here.

Product data sheet

ETA-11/0024

Art. no.	Dimensions	Drive	Thread length	PU	EAN
945713-TX40	6,0 x 60 mm	TX40	36 mm	100	4064827281772
945717-TX40	6,0 x 80 mm	TX40	48 mm	100	4064827279885
945719-TX40	6,0 x 100 mm	TX40	60 mm	100	4064827279892
945721-TX40	6,0 x 120 mm	TX40	70 mm	100	4064827279908
945723-TX40	6,0 x 140 mm	TX40	70 mm	100	4064827279915
945725-TX40	6,0 x 160 mm	TX40	70 mm	100	4064827279922
945726-TX40	6,0 x 180 mm	TX40	70 mm	100	4064827279939
945727-TX40	6,0 x 200 mm	TX40	70 mm	100	4064827279946
945728-TX40	6,0 x 220 mm	TX40	70 mm	100	4064827279953
945729-TX40	6,0 x 240 mm	TX40	70 mm	100	4064827279960