KonstruX ST, cylinder head stainless steel A4

KonstruX ST A4 maximise a joint’s load-bearing capacity with a high thread-extraction resistance in both components. If partially threaded screws are used, the joint’s load-bearing capacity is limited by the considerably lower head-pull-through resistance in the attached part.

Suitable for use in wood/wood joints, both indoors and outdoors.

The application areas of KonstruX ST A4 can be found on playgrounds, balconies, in sun protection in the form of a pergola as well as in hydraulic engineering, e.g. jetties and piers outdoors.

Advantages

Can be used in service classes 1 to 3 according to DIN EN 1995 - Eurocode 5
Suitable for woods containing tannins and salty atmospheres
Corrosion-resistant and conditionally acid-resistant
Good resistance in moderately aggressive environments that do not contain chlorine

Material

Austenitic high-grade steel A4 1.4401

Follow the application instructions in the product data sheet.

Product data sheet

ETA-11/0024

Art. no.	Dimensions	Drive	PU	EAN
944780	6,5 x 140 mm	TX40	50	4064827151983
944781	6,5 x 160 mm	TX40	50	4064827151990
944782	6,5 x 195 mm	TX40	50	4064827152003
944783	8,0 x 155 mm	TX40	50	4064827152010
944784	8,0 x 195 mm	TX40	50	4064827152027
944785	8,0 x 220 mm	TX40	50	4064827152034
944786	8,0 x 245 mm	TX40	50	4064827152041
944787	8,0 x 270 mm	TX40	50	4064827152058
944788	8,0 x 295 mm	TX40	50	4064827152065
944789	8,0 x 330 mm	TX40	50	4064827152072
944790	8,0 x 375 mm	TX40	50	4064827152089
944791	8,0 x 400 mm	TX40	50	4064827152096

KonstruX ST, cylinder head stainless steel A4

E.u.r.o.Tec GmbH