Snap-in fastener

The Eurotec snap-in fastener is used for the installation of start or end floorboards on a terrace with concealed screw connections. The fastener consists of two parts: the plug and the socket. The socket can be attached to the side of the substructure using the screws supplied. The plug is fixed underneath the floorboard and can then be snapped into the socket. The product enables quick and unproblematic installation of start or end floorboards on the terrace. The snap-in function of the fastener covers a wide range of substructure assembly heights.
All concealed Eurotec fastening solutions can be used to install the remaining floorboards.

Advantages/Specifications

• Quick and easy installation of the start and end floorboards
• Adjustment range from 19.5 – 45.5 mm*
• Can be used in combination with both a wooden and an aluminium substructure
• Both laterally grooved and non-grooved floorboards can be fastened without any problems

Material

• PP-C (polypropylene copolymer)

*The adjustment range is calculated from the distance between the upper web of the plug and the attachment point of the clip to the substructure.
**4 pc. Thermofix screws 4.2 x 17 mm are included in the scope of delivery