Digital solution for efficient dimensioning
Eurotec's free ECS design software provides a digital solution for timber and concrete construction projects. This software can be used to carry out static pre-dimensioning with verifications for various concrete fixings. Any construction project can be designed using fasteners from the Eurotec range.
The “Concrete Fixing” module is a tool for the design of rock bolts and anchor bolts for steel or timber fixings. All that is required for preliminary design is the geometry of the components to be connected, the tensile and shear loads to be applied and the bending moments of the connection in all three axial directions.
The ETA-certified rock-concrete screws from Eurotec
Whether permanent or temporary, Eurotec's Rock concrete screws are the ideal solution for fast and efficient fixing in concrete.
The special feature of Eurotec's ETA-certified Rock concrete screws is that they can be installed without the use of dowels. They are ideal for fixing into solid substrates such as concrete (normal concrete C20/25 to C50/60) or masonry. The dowel-less fixing method saves time - especially when installing heavy equipment - as the Rock concrete screw is screwed directly into the pre-drilled hole without the need for additional dowels. As it is screwed in, the thread cuts a counter-thread into the substrate. High-strength screw steel, a sophisticated hardening process and a special thread design ensure reliable performance of the Rock concrete screw.
Maximum load-bearing capacity, minimum spacing - the Eurotec bolt anchor
The Eurotec bolt anchor is a force controlled, galvanised steel anchor designed for push-through installation in non-cracked concrete. Its special feature is that it allows small centre and edge distances despite its high load capacity. The ETA-certified bolt anchor is extremely versatile due to the different embedment depths and dimensions. In addition, each bolt anchor is fitted with an expansion clip which ensures a high load bearing capacity and reduces the number of fixing points required.
Vous êtes artisan ? Vous obtiendrez alors de notre part des conseils et astuces intéressants. Profitez de notre précieux savoir-faire. Articles techniques et vidéos issus des différents domaines de la technique de fixation.
Vous trouverez dans notre section « Savoir-faire » tout ce qu’il faut connaître concernant nos produits.
Vous trouverez ici des informations et des nouveautés tournant autour d’Eurotec.
Découvrez nos catalogues, nos produits ou d’autres thèmes.
As a specialist in fastening technology, we have been offering fastening solutions for a wide variety of construction projects for 25 years. We are proud and happy to be able to look back on 25 years of Eurotec.
The ECS calculation program 3.0 has been revised and expanded and is now available in two versions: one for single-user applications and one for single-user applications in company networks (MSI). Both versions are available for download after registration so that users can choose the appropriate version.
Eurotec's concrete frame screws have been successfully tested in classes RC2 / RC2N and RC3, highlighting the robustness and versatility of the concrete frame screws.
Auguriamo a voi e ai vostri cari un Buon Natale e un felice Anno Nuovo 2024. Tieni presente che dal 23 dicembre 2024 al 2 gennaio 2025 saremo chiuso per ferie aziendali.
Paneltwistec TK AG StrongHead si rivela estremamente versatile per l'incollaggio a pressione, in quanto può essere avvitata nel CLT (legno lamellare a strati incrociati) o nel legno lamellare senza bisogno di preforare. La punta della vite AG garantisce un avvitamento rapido con un rischio minimo di rottura.
La gamma di applicazioni delle viti KonstruX in acciaio inox A4 comprende numerose possibilità di giunzione sia in ambienti interni che esterni. Le versioni in acciaio inox consentono di utilizzare le viti per legni contenenti tannini e in atmosfere aggressive e salmastre.
Ne plus jamais manquer les nouveautés et les informations concernant Eurotec
Concernant quels thèmes souhaitez-vous être informé ?(Plusieurs choix possibles)
Oui, j’accepte les dispositions en matière de protection des données de la Société Eurotec GmbH et je souhaite être régulièrement informé des nouveaux produits et des nouveautés intéressantes. Je peux révoquer ce consentement à tout moment.
Vous souhaitez être toujours au fait de tout ? Dans notre section News, vous obtiendrez un aperçu exclusif de notre entreprise. Lisez maintenant !
Vis pour constructions en bois et systèmes de fixation pour le bois et le béton, de même qu’ossatures porteuses de grande qualité et technique de fixation pour la construction de jardins et de terrasses : tout ceci, et bien plus encore, vous le trouverez dans notre assortiment de produits !
Apprenez à nous connaître ! Nous, Eurotec, proposons à nos Clients un très large portefeuille de produits et de longues années d’expérience.
Deutsch 
English 
Español 
Italiano 
Français 
Polski